Sanding Aid 1 oz. Seals the surface & allows air to cure at the surface.

PRODUCT FEATURES:

★ Ease of application and removal. May be allowed to stand at length and still polish wipe easily.

★ Provides hard film with superior heat and chemical properties.

★ Polishes to high gloss without streaking.

★ Reduced wax build up and styrene accumulation.

PHYSICAL PROPERTIES:

Dry Time: 5-10 minutes @ 720 F. Will vary depending on working temperature. Melt Points: 180-2100 F Penetration Hardness: 1 at 250 C (Carnauba Wax) Color: Light blue tint. Color-coded for identification.

USES:

As release agent for Polyester/Fiber Glass molding on all FRP tooling, Formica, metal and other hard surface molds.

★ Open mold hand or spray lay-up

★ Compression molding

★ Resin transfer molding (RTM)

★ Vacuum bag

NOTE: Check suitability when heat curing or higher temperature molding above 2000 F. (940 C).