Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_EL9QHKG10GPM20IJGE61AK10S6
Z7_EL9QHKG10GPM20IJGE61AK10S5
Home  > FGCI Website(x)
|◀ 241 - 252 of 374 ▶|
View:
  **Due to the current situation with COVID-19, We are limiting orders to TWO BOXES, in an attempt to keep up with Demand and ensure every customer has some hand protection**
Thank you for your understanding! 
Item#:
128905
Manufacturer:
FGCI Website
Your Price:
0.06
Each
  **Due to the current situation with COVID-19, We are limiting orders to TWO BOXES, in an attempt to keep up with Demand and ensure every customer has some hand protection**
Thank you for your understanding! 
Item#:
128907
Manufacturer:
FGCI Website
Your Price:
0.06
Each
  **Due to the current situation with COVID-19, We are limiting orders to TWO BOXES, in an attempt to keep up with Demand and ensure every customer has some hand protection**
Thank you for your understanding! 
Item#:
128909
Manufacturer:
FGCI Website
Your Price:
0.06
Each
 **Due to the current situation with COVID-19, We are limiting orders to TWO BOXES, in an attempt to keep up with Demand and ensure every customer has some hand protection**
Thank you for your understanding! 
Item#:
128903
Manufacturer:
FGCI Website
Your Price:
0.06
EA
Kay-Cel is a rigid, closed-cell, high-density polyurethane foam core panel. The reinforced panel is a sandwich construction with fiberglass reinforcements. The sheets have a 25lb density with 18oz Woven Roving on Both sides. Great for transoms, and other structural projects.


ADVANTAGES:

Excellent Strength-to-Weight ratio

Foam Reinforced with fiberglass increases mechanical properties

Lightweight - 30% Lighter Than Marine Plywood

Closed Cell Cross-Linked Polymer Foam will not absorb water

Will Not Rot...Excellent Replacement for Wood

Item#:
135209
Manufacturer:
FGCI Website
Your Price:
272.60
Each

Item cannot be shipped via UPS or FedEx due to oversized.

 
Carbon-Core Plastic Honeycomb sheets are made out of polypropylene and come in an open cell configuration or with a layer of non-woven polyester scrim for a one hundred percent bonding surface. Carbon-Core Plastic Honeycomb can be used for sandwich panel cores and energy absorption. Plastic Honeycomb has a high strength to weight ratio, is sound dampening, and can be recycled. Most importantly, Plastic Honeycomb sheets are corrosion, fungi, rot, chemical, and moisture resistant. Carbon-Core Plastic Honeycomb panels are available as plain or scored sheets. Standard sheets measure 48”x96” from 0.25” up to 2” thick. Special orders are available.  

 

¨ Self-extinguishing 

¨ Low resin absorption  

¨ Great impact strength  

¨ Great strength to weight ratio  

¨ High sound dampening properties  

¨ Resistant to corrosion, fungi, rot, chemicals, and moisture  

¨ Recyclable  

¨ Lightweight 

Item#:
137808
Manufacturer:
FGCI Website
Your Price:
379.63
Each
This item is temporarily unavailable.
Item#:
125848
Manufacturer:
FGCI Website
This item is temporarily unavailable.
 Directions for Use:
Step 1: Choose the appropriate volume for your project. The type of fiberglass used will determine the amount of resin needed.
Step 2: Make sure to agitate or stir the product thoroughly before use.
Step 3: Mix in the MEKP, stirring thoroughly. Please refer to the Catalyst Concentration Chart for quantities.
Step 4: Thinner fiberglass can easily be wet through. To thoroughly wet out heavier materials, apply resin first to one side, then flip the glass over to wet out the other side. Use paint-style rollers to distribute resin quickly.
Step 5: Roll each layer with a glass roller to remove air. The fiberglass will go completely transparent when it is adequately wet.
Step 6: Add sanding aid (Product #123833) to the final coat to allow a full cure and a tack-free surface.
Item#:
128848
Manufacturer:
FGCI Website
 
Ground Shipping Only
This item is temporarily unavailable.
Your Price:
7.64
Each
Your Price:
3.57
Each
Item#:
129703
Manufacturer:
FGCI Website
Your Price:
15.74
Each
|◀ 241 - 252 of 374 ▶|
View: