S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
1 - 12 of 188 ▶|
View:
 
Description
Price
Quantity
DESCRIPTION: 
Fiberglass Coating Bubble Buster is a proprietary blend of low viscosity solvents specifically designed to break the surface tension of curing high solids resin mixtures such as Table Top Epoxies.
Directions for use: 
Allow Table Top products or resins to stand alone for 5 to 10 minutes until bubbles have risen to the surface, then lightly mist Bubble Buster over that surface and watch the bubbles disappear. A second application several minutes later may also be desirable
Precautions: 
Bubble Buster is extremely Flammable, Do not use near open flames.
Product is to be lightly misted over the surface and should not accumulate or pool up on the surface. 
Item#:
123757
Manufacturer:
FGCI Manufactured Item
 
Ground Shipping Only
Our 1 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of one part Resin ( A side ) to one part Activator (B side ) by volume.

When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature).

This system will cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

**As with all adhesive compounds bonding surfaces should be clean and free dirt or grease**

Item#:
125227
Our 1 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of one part Resin ( A side ) to one part Activator (B side ) by volume.

When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature).

This system will cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

**As with all adhesive compounds bonding surfaces should be clean and free dirt or grease**

Item#:
125228
 Our 1 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of one part Resin ( A side ) to one part Activator (B side ) by volume.

When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature).

This system will cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

**As with all adhesive compounds bonding surfaces should be clean and free dirt or grease**

Item#:
125229
 Our 1 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of one part Resin ( A side ) to one part Activator (B side ) by volume.

When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature).

This system will cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

**As with all adhesive compounds bonding surfaces should be clean and free dirt or grease**

Item#:
125231
Our 1 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of one part Resin ( A side ) to one part Activator (B side ) by volume.

When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature).

This system will cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

**As with all adhesive compounds bonding surfaces should be clean and free dirt or grease**

Item#:
125232
 

Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

Item#:
125234
 

Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

Item#:
125235
 

Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

Item#:
125236
 Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

Item#:
125238
 Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

Item#:
125239
 Our 3 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of three parts Resin ( A side ) to one part Activator (B side ) by volume. It Is significantly faster setting then our 2 to 1 system with improved chemical and solvent resistance and generally improved physical properties. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally form a tougher stronger plastic with better adhesion and very good resistance to hydrocarbon fuels and ethanol. When used with our Laminating Epoxy Resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility, slightly less solvent resistance and lower HDT. Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

Item#:
125242
1 - 12 of 188 ▶|
View: