Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

 

Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

 

Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

 Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

This resin was designed for mass casting applications where the volume of the project needs to be stress free and crack resistant. This water clear casting resin meets the need where the low exotherm and long gel times are required to provide successful results. The ideal working temperature is at 77°F. Best results for this product can be obtained at temperatures between 70°F and 85°F, in a clean, dry, dust-free environment. FGCI’s Clear Casting Resin is a polyester resin for ambient temperature cure with MEK-P. It is used to produce medium to large size castings with great clarity. FGCI’s Clear Casting Resin was designed to reduce the appearance of cracks in larger castings with a long cure time, low peak exotherm, and minimal shrinkage. If sanding is required, use 320 grit. Be sure to clean the surface before applying any additional layers.  

 Our 2 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of two parts Resin ( A side ) to one part Activator (B side ) by volume. It Is faster setting with generally improved properties then our 1 to 1 Activator system. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally forms a tougher stronger plastic with better adhesion. When used with our Laminating Epoxy resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility and a lower HDT (Heat Distortion Temperature). Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

This resin was designed for mass casting applications where the volume of the project needs to be stress free and crack resistant. This water clear casting resin meets the need where the low exotherm and long gel times are required to provide successful results. The ideal working temperature is at 77°F. Best results for this product can be obtained at temperatures between 70°F and 85°F, in a clean, dry, dust-free environment. FGCI’s Clear Casting Resin is a polyester resin for ambient temperature cure with MEK-P. It is used to produce medium to large size castings with great clarity. FGCI’s Clear Casting Resin was designed to reduce the appearance of cracks in larger castings with a long cure time, low peak exotherm, and minimal shrinkage. If sanding is required, use 320 grit. Be sure to clean the surface before applying any additional layers.  

This resin was designed for mass casting applications where the volume of the project needs to be stress free and crack resistant. This water clear casting resin meets the need where the low exotherm and long gel times are required to provide successful results. The ideal working temperature is at 77°F. Best results for this product can be obtained at temperatures between 70°F and 85°F, in a clean, dry, dust-free environment. FGCI’s Clear Casting Resin is a polyester resin for ambient temperature cure with MEK-P. It is used to produce medium to large size castings with great clarity. FGCI’s Clear Casting Resin was designed to reduce the appearance of cracks in larger castings with a long cure time, low peak exotherm, and minimal shrinkage. If sanding is required, use 320 grit. Be sure to clean the surface before applying any additional layers.  

 Our 3 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of three parts Resin ( A side ) to one part Activator (B side ) by volume. It Is significantly faster setting then our 2 to 1 system with improved chemical and solvent resistance and generally improved physical properties. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally form a tougher stronger plastic with better adhesion and very good resistance to hydrocarbon fuels and ethanol. When used with our Laminating Epoxy Resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility, slightly less solvent resistance and lower HDT. Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

 Our 3 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of three parts Resin ( A side ) to one part Activator (B side ) by volume. It Is significantly faster setting then our 2 to 1 system with improved chemical and solvent resistance and generally improved physical properties. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally form a tougher stronger plastic with better adhesion and very good resistance to hydrocarbon fuels and ethanol. When used with our Laminating Epoxy Resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility, slightly less solvent resistance and lower HDT. Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

 

Our 3 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of three parts Resin ( A side ) to one part Activator (B side ) by volume. It Is significantly faster setting then our 2 to 1 system with improved chemical and solvent resistance and generally improved physical properties. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally form a tougher stronger plastic with better adhesion and very good resistance to hydrocarbon fuels and ethanol. When used with our Laminating Epoxy Resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility, slightly less solvent resistance and lower HDT. Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.